Guide
Image Converter: practical guide
Convert an image to a different file format and save a new copy. This guide follows the task from the original material to a checked, saved result. The tool is intended for a focused operation: it helps you work with JPG, PNG, WebP, HEIC, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA and produce JPG, PNG, WebP, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA. Start with the example below, then adapt the settings to your own material. The original and the exported result should remain separate until you have inspected both.
Input- JPG, PNG, WebP, HEIC, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA
Output- JPG, PNG, WebP, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA
Settings- from, to, quality
- Example
- photo.png → photo.jpg; quality 85
Start with the result you actually need
Decide where the result will go before changing any settings. A preview for a website, a document attachment, a developer test and a print asset have different requirements. Write down the expected format, the information that must remain intact and the application that will open the result. This turns a vague request to “make it work” into a small set of checks. In this tool the output is JPG, PNG, WebP, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA; verify that the next application accepts it rather than relying on a familiar filename extension.
The example for this task is: photo.png → photo.jpg; quality 85. Treat it as a small, inspectable experiment. A successful experiment shows both what the tool changes and what it leaves alone. It does not prove that every large or unusual input will behave identically. Once the example is clear, move to one representative item from your own work and compare the two outcomes.
Prepare the source
The starting material is JPG, PNG, WebP, HEIC, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA. Use a copy when the source is valuable or difficult to recreate. Give it a recognizable name and keep the original in a separate folder. If you paste text, check the beginning and end of the selection: accidentally omitting one line can matter more than the transformation itself. If you select files, inspect the selected filenames rather than assuming that the operating-system picker retained the order you wanted.
Remove unrelated items before processing. A small representative sample makes an error easier to identify and reduces the amount of data you need to inspect. Do not repair a broken input by merely changing its extension; the extension and the contents are different things. If the source already looks incorrect in its normal viewing application, resolve that issue before interpreting a processing failure as a tool defect.
Understand the controls
The relevant parameters are from, to, quality. Read the labels and units beside the controls. A pixel count, a percentage, a position and a character string are not interchangeable even when they are all entered into a small field. Use the available choices as the definition of the current interface; a guide cannot add a feature that is absent from the page. Start with conservative values and change one parameter at a time so that each visible difference has an explanation.
An empty field is not always equivalent to zero, and a selected option may apply to more than one part of the result. Before repeating an operation, inspect the settings again. Some tools remember preferences in the current browser, while opening another browser or clearing site data may reset them. If reproducibility matters, note the actual values used instead of relying on an assumed default.
A first complete pass
Open the workspace, supply the source and inspect the available controls. Use from, to, quality to choose the intended transformation. Where the interface updates automatically, wait for the current result before making another change. Where a separate action button is provided, activate it once and wait for completion. A visible preview and an enabled export control indicate different stages: the preview helps you inspect the operation, while export creates the item you will keep.
Use the example photo.png → photo.jpg; quality 85 to check the direction of the transformation. If the preview differs from what you expected, return to the smallest input and reconsider the selected mode. Avoid immediately applying several compensating changes. A short sequence of deliberate adjustments is much easier to understand than an accumulation of settings whose individual effects are unknown.
Compare before and after
Compare the source and the result using the same viewing conditions. Check the important content first, then the structure, dimensions or record count that matter to the task. Finally inspect names, format and file size where applicable. A smaller output is not automatically better, and a larger output is not automatically wrong. The useful question is whether the result meets the requirement you wrote down at the beginning.
Look beyond the first screenful. Inspect the final lines, the last page, a corner of the image or the final entry in a collection, depending on the source. Problems often appear at boundaries: a clipped edge, an omitted item, a trailing delimiter or an unexpected empty section. Reviewing both the beginning and the end takes little time and catches mistakes that an attractive preview can hide.
Save and reopen the actual export
The output of this operation is JPG, PNG, WebP, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA. Download it or copy the result using the control provided by the page. Choose a destination you can find again and use a name that distinguishes the processed version from its source. Browser download behavior varies: on a phone the file may appear in a downloads panel, a Files application or a sharing sheet. Confirm that a real file was saved before closing the tab.
Reopen that saved result in the application where it will be used. This is a stronger check than looking only at an in-page preview. The destination may interpret text encoding, dimensions, colors, document structure or filenames differently. If the destination rejects the result, keep both files and the chosen settings so you can identify the point at which the workflows disagree.
Know the limits of this operation
JPEG has no transparency; an SVG export of a raster image is not vector tracing. Decoder support and memory depend on the browser.
A successful run means that the selected operation produced a result; it is not a guarantee about every possible use of that result. The tool does not know your publication rules, brand requirements, access permissions or the expectations of a receiving system. Check those separately. When a source has unusual structure, test a small representative example before committing an entire collection to the same workflow.
Work comfortably on a phone or tablet
Use the file picker or the input area that matches your source. On a narrow screen the workspace is arranged vertically, so the preview or download button may appear below the settings. Scroll through the complete section before assuming a control is missing. Close the on-screen keyboard when you need to inspect the result; it can otherwise cover a large part of the available workspace.
Keep the processing tab in the foreground for demanding operations. Mobile browsers may suspend background tabs or reclaim memory when another application opens. A large source can therefore behave differently on a phone and a desktop even with identical settings. If a task stalls, retry with one smaller representative item. Increasing browser zoom should not be necessary to select a normal button, but zoom can help inspect a detail in the exported result.
Understand processing and privacy
The service's file and text transformations run in the browser. Choosing a file gives the page access to that selected file; it does not grant access to every folder on your device. Account actions, aggregate service statistics and an error report use separate site requests. Optional analytics and advertising follow the site's consent setting, so the existence of a local processing workflow should not be interpreted as “the website makes no network requests.”
Only include the information needed for the task. Avoid pasting passwords, live access tokens or unrelated personal records into examples. If you submit a problem report, describe the operation and the error using a minimal sample. You do not need to include a confidential source file merely to explain that a control did not respond. On a shared computer, also consider files left in the downloads folder after the browser tab is closed.
Diagnose an unexpected result
First confirm that you opened the intended service and supplied JPG, PNG, WebP, HEIC, AVIF, SVG, TIFF, BMP, GIF, ICO, JXL, JP2, QOI, TGA. Then check the chosen values for from, to, quality. Try the documented example and observe whether the same issue occurs. If the example works but your source does not, the difference is useful evidence: it may involve input structure, an unsupported feature, a very large item or a setting that only matters for that source.
Record the visible message, the browser and the smallest sequence of actions that reproduces the problem. Try another current browser only after you have checked the input and settings. Avoid repeatedly submitting the same large job while the previous one is still running. If there is a cancel control, wait for it to finish; if the page must be reloaded, remember that unsaved results may be lost.
Keep a reproducible workflow
For work you expect to repeat, keep a short note with the source name, the intended output, the important settings and the checks you performed. An example note for this service starts with photo.png → photo.jpg; quality 85, followed by your actual values for from, to, quality. Do not store secrets in that note. The purpose is to let you or a colleague reproduce the transformation without guessing what happened in an earlier browser session.
When comparing two attempts, change a single variable and label the outputs clearly. Otherwise you may mistake a difference in input or settings for a difference in the tool. If several related services are involved, save an intermediate result after each substantial transformation. This makes it possible to identify the step that introduced a problem and to repeat only that step.
Final review before sharing
Confirm that the exported item opens, contains the expected content and has a suitable name. Check the destination's current requirements rather than assuming that a successful download proves compatibility. Review a representative detail and a boundary case, such as the first and last item. Keep the source until the recipient or receiving application has accepted the result.
Use the other tools in the same category only when they solve a remaining task. Each additional transformation can alter information, structure or quality, so a shorter sequence is often easier to verify. The aim is a checked result that fits its purpose: prepare the source, make a deliberate change, inspect the export and keep enough context to repeat the operation when needed.